Case Studies | Nest Assured Inspections

Real Inspection Evidence

Small details. Big consequences.

These examples are based on real inspection findings and show how photographic evidence helps homeowners raise issues clearly with the builder.

Moisture meter reading recorded during inspection

Pre-Completion Inspection

Water Ingress Identified Before Completion

During a recent PCI inspection, significant water ingress was identified to the French door reveals, with visible water damage including blown skirting boards and staining to internal walls.

Moisture meter readings recorded 25%, and external checks showed the brickwork becoming saturated. The finished ground level had not been maintained at the recommended level below the damp-proof course, increasing the risk of moisture-related issues.

Issue identified before completion
Recorded within a detailed photographic report
Developer able to investigate and arrange remedial works

Blocked weep hole found during a new-build snagging inspection

External Defect

Blocked Weep Holes

Blocked weep holes are a perfect example of a seemingly minor defect that can create much larger problems if ignored. They are designed to allow moisture to escape from the cavity; when blocked or obstructed, they can contribute to damp-related issues and reduced long-term performance of the building fabric.

Issue photographed and recorded
Location clearly identified for the builder
Included within the final snagging report

Door gap issue checked during a snagging inspection

Internal Check

Fire Door / Door Gap Checks

Incorrect door gaps should not simply be viewed as a cosmetic issue. Where a door is required to perform as intended in the event of a fire, poor alignment or excessive gaps can have life safety implications. Small defects at handover can have much greater consequences if left unresolved.

Visible door gap concerns recorded
Clear photo evidence provided
Raised as part of the homeowner report

Finishing Defects

Internal Finishing and Flooring Issues

Minor flooring defects can appear insignificant initially, however if they are not identified and addressed early they can lead to larger issues over time, including movement, deterioration of finishes and potential failure of the floor covering. Early identification helps defects get rectified before they become more costly and disruptive.